Pierogi Tether turns your iPad into a receiver for photos sent from a camera over Wi-Fi.
Every shot appears on the big screen the moment it is taken, so the person in front of the
camera can see it immediately.
What you need
An iPad running iPadOS 17 or later.
A camera with a built-in FTP client and automatic transfer after each shot.
A Wi-Fi network that both the camera and the iPad are joined to. The camera's own
access-point mode does not work for FTP transfer — you need a shared network.
Setting up
Open the app. On the start screen you will see a Camera server card with
an IP address, port, username and password.
Type what you are shooting and tap Start tethering.
In your camera's FTP transfer settings, create a server entry using exactly those values.
Turn passive mode on and FTPS off.
Enable automatic transfer after shooting. If your camera shoots RAW+JPEG, set it to send
the JPEG only — the RAW stays on the card and the transfer stays fast.
Take a photo. It should appear on the iPad within a second or two.
No camera at hand? Tap Try demo with sample photos on the start screen.
It loads a handful of bundled sample images through exactly the same pipeline a real camera
would use, so you can see how a shoot looks.
During a shoot
The newest photo fills the screen. Swipe to go back through earlier shots.
Tap the big photo to open the fullscreen viewer — swipe between shots, pinch to zoom,
drag down to close.
Tap the heart to like a photo.
The star button exports your liked photos as XMP sidecar files. Import them next to your
RAW files and the liked shots come in rated 5 stars.
If something does not work
Symptom
Most likely cause
Status stays “Waiting for camera”
Camera and iPad are on different networks, or the IP address in the camera is stale — the iPad's address changes when it rejoins a network.
Camera reports a login error
Username or password does not match the Camera server card exactly. Both are case-sensitive.
Connects, but no photos arrive
Passive mode is off in the camera, or automatic transfer after shooting is not enabled.
No photos and no error at all
Local network permission was denied. Open Settings → Pierogi Tether and turn Local Network on.
Transfers are slow
The camera is sending RAW. Switch the transfer target to JPEG only.